PS-12260 / 12V-26.0 Amp. Hr. Battery
General Specifications
6.89 inches
175 millimeters
6.54 inches
166 millimeters
4.92 inches
125 millimeters
Approximate Weight
18.7 pounds
8.5 kilograms
Quick Disconnect Tabs
or "NB" type (5mm)
Nut & Bolt
ABS Plastic
Electrical Specifications
Nominal Voltage:
12 Volts (6 cells in series)
Nominal Capacity:
20 hour rate
(1300mA to 10.50 volts)
26.0 AH
10 hour rate
(2350mA to 10.50 volts)
23.5 AH
5 hour rate
(4200mA to 10.20 volts)
21.0 AH
1 hour rate
(16000mA to 9.00 volts)
16.0 AH
Energy Density (20 hour rate)
1.40 Watt-hours/cubic inch
86.0 Watt-hours/l
Specific Energy (20 hour rate)
16.7 Watt-hours/pound
36.7 Watt-hours/kg
Internal Resistance (Fully Charged Battery)
10 milliohms (approx.)
Material Safety Data Sheet (45k gif)


Cycle Applications: Limit initial current to 5200mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68' F (20' C). Hold at 14.40 to 14.70 volts until current drops to approximately 260mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage.

"Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.


Homepage | E-mail