Hero-1 Power Supply Notes
The externial power supply for the Hero-1 consist of a transformer
which steps the 125Vac down to aprox 20VAC. Its output is then through
R1, R2 to limit the current. This then goes to a full-wave bridge and
is filtered by C1 producing approximately 25-28Vdc unregulated.
C1 3300uf
R1 2.5ohm 10W
R2 2.5ohm 10W
P101 (the plug) is wired as follows:
+25V 1 Ground
| 2 shorted to 3
+--------|----+ 3 shorted to 2
| 3 6 9 12 | 4 Ground
> | | | | 5 shorted to 6
| 2 5 8 11 | 6 shorted to 5
> | 7 no connection
| 1--4 7 10 | 8 +25V
+--|----------+ 9 +25V
| 10 no connection
Ground 11 no connection
12 no connection